Slide 1: Killtest is the best choice for all your IT exam preparation. Before you buy these exams from us, we can offer you some free demos of each products. You can check out the interface, question quality and usability of our practice exams before you decide to buy. The followings are some latest and hottest exams in Killtest now, such as the VCP-510 exam, SY0-301 exam, EX0-115 exam, HP2-H18 exam, 250-310 exam, 000-581 exam and so on. Welcome to Killtest.com now, then get more benefits from there.
Slide 2: The safer , easier way to help you pass any IT exams.
Exam
: 000-109
Title
: Virtualization Technical Support for AIX and Linux V2
Version : DEMO
1/4
Slide 3: The safer , easier way to help you pass any IT exams.
1.An administrator has the following configuration on a VIO Server:
Why is this error being displayed? A. ent3 is configured as 'standard' instead of '802.3ad' B. ent3 is a LHEA port and requires the -L flag C. ent3 has no interface connected D. ent3 is controlled by the SEA Answer: D 2.An administrator needs to update a legacy VIO server (VIOS) partition from version 1.5 to the most current version. The rootvg of the VIOS server is presented from SAN and is managed using the SDDPCM package. Which of the following must be considered? A.The latest version of SDDPCM should be included in the NIM lppsource for the upgrade. B.The IBM supplied scripts and procedures should be followed in order to migrate VIOS with SDDPCM. C.SDDPCM is now included in AIX 6. Upgrading of the package will occur automatically. D.SDDPCM must be upgraded immediately before the VIOS migration. Answer:B 3.After applying the latest Fix Pack to a VIO server, the administrator finds an issue with the hosted media repository. The lsrep command fails with the following error : "Unable to retrieve repository date due to incomplete repository structure" What is the most likely cause for this error? A.The VIO server has not been rebooted since applying the Fix Pack. B.The Fix Pack reset the date and time to the shipped default. C.The repository was in a loaded state prior to applying the Fix Pack. D.The reboot caused the repository to forcibly unmount. Answer:C 4.After installing a new VIO server partition an administrator noticed that the time zone is incorrectly set to CST6DST. The administrator would like the time zone set to Europe/London. Which command will achieve this? A.chdate -timezone Europe/London B.chzone -zone Europe/London C.chtime -tz Europe/London
2/4
Slide 4: The safer , easier way to help you pass any IT exams.
D.chsys -timezone Europe/London Answer:A 5.A dedicated LPAR has two dedicated Fibre Channel HBAs assigned to it. In order to reduce the amount of hardware, the LPAR will be migrated to a currently running VIO server. The administrator collects some server performance from the VIO server and notices that the I/O peaks at 5.5Gbits and runs at an average of 4Gbits per second. The VIO Server runs two dual port 8Gbit FCS cards, so the load is not affected by other LPARS on the VIO Server. Which of the following is the most cost-efficient configuration for the VIO client? A.Assign vSCSI disk for the new client LPAR through prioritized channels. B.Assign one of the ports in the 8Gbit Fibre Channel HBA, using NPIV directly to the new client partition. C.Dedicate two new Fibre Channel HBAs to the VIO Server and use them to exclusively host the vSCSI disks for the new client partition. D.Install SDDPCM drivers onto the VIO Server, set up the client LPAR and run the following command: "datapath priorities vhostX fscsi0 fscsi1 fscsi2 fscsi3". Answer:D 6.When installing a Linux LPAR from an AIX NIM server, what steps are required? A.Add LPAR details to /etc/bootptab Copy DVD to a local directory and add directory to /etc/exports Copy network boot kernel to /etc/tftpboot Boot into SMS and configure remote IPL settings B.Configure LPAR as a NIM client Copy DVD to local directory Configure Linux SPOT Boot into SMS and configure remote IPL settings C.Add LPAR details to /etc/tftp/other/kernel.conf Copy DVD to local directory and add to /etc/exports Copy network boot kernel to /tftpboot/kernels Boot into SMS and configure remote IPL settings D.Copy DVD to local directory and export via /etc/exports Copy network boot kernel to /etc/tftpboot Define LPAR as a NIM client and initiate a bosinstall Boot into SMS and configure remote IPL settings Answer:C 7.An administrator needs to add additional LPARs to a Power 770 server, but all of the available memory on the system is currently assigned to existing LPARs and is continually utilized.
3/4
Slide 5: The safer , easier way to help you pass any IT exams.
What solution can the administrator implement on the system to add the LPARs? A.Active Memory Expansion B.Active Memory Compression C.Virtual Memory Management D.Weighted Memory Allocation Answer:A 8.A company has a VIO server supporting several infrastructure LPARs, including a NIM server, several NFS servers, and a document management server. Network connectivity is provided from the VIO server through the 1Gb IVE. The NIM clients frequently receive "NFS Server not responding" errors during installations due to the volume of traffic to the server. When planning an upgrade to POWER7 hardware, which action will minimize these errors? A.Share the IVE directly to the LPARs. B.Implement Jumbo Frames on the 1Gb IVE adapters. C.Implement a 10Gb network infrastructure. D.Assign dedicated 1Gb adapters to each LPAR. Answer:C 9.To prevent frames being dropped as a result of network congestion on high speed links, IBM recommends enabling the use of pause frame on compatible switches and IVE adapters. Which attribute enables pause frames? A.Flow Control B.Jumbo Frames C.Port Group MCS D.802.3ad Answer:A 10.An administrator plans to implement Active Memory Expansion on several LPARs on a Power 770 system. Which tool should be used to determine the recommended LPAR settings for Active Memory Expansion? A.amepat B.amelpar C.amemon D.amestat Answer:A
4/4
Slide 6: Welcome to Killtest.com to get this exam pdf and then prepare your exam well. If you have any other questions, plz contact with us in time via this email support@killtest.com . Thanks !
