Hide Notes 

Slide 1: Short notes For exam 70-270 Administering Windows XP Professional www.testout.com Brought to you by Piratez
Slide 2: Administering Windows XP Professional Table of Contents 1.Installation ................................................................................................................................................ 5 Installing Windows XP Facts Upgrading to Windows XP Facts Network Installation Facts Automated Installation Facts Troubleshooting Installation Facts 2.Users & Groups.......................................................................................................................................... 9 User Preferences Facts Built-in and Predefined User Accounts User Preferences Facts Built-in and Predefined User Accounts Local User Account Best Practices Built-in Local Groups Implicit Local Groups Local Group Facts User Profile Management Tasks Folder Redirection Facts Group Policy Facts 3.Installing Hardware ................................................................................................................................. 14 Installing Devices Drivers File Verification Programs Multiple Monitors Multiple Processors Power Management Hardware Profile Considerations 4.Networking .............................................................................................................................................. 19 Network Components TCP/IP Configuration Settings Troubleshooting TCP/IP Name Resolution Facts Dial-up Connection Facts Remote Authentication Protocols VPN Tunneling Protocols Common Port Numbers ICS and ICF Facts Remote Services Facts 5.Disk Management ................................................................................................................................... 25 File System Facts Basic and Dynamic Disks Volume Characteristics Volume Mount Point Facts Designing Disks for Multiple Operating Systems Boot.ini Facts Piratez Book Page2
Slide 3: Administering Windows XP Professional 6.Managing Files......................................................................................................................................... 28 File Compression Facts Encryption Facts Disk Quota Facts NTFS Permission Facts Shared Folder Facts Offline File Facts Internet Information Services (IIS) 7.Printing .................................................................................................................................................... 33 Printing Facts UNIX Printing Facts Managing Printing Advanced Print Configuration Multiple Printers Printer Pooling Faxing Facts 8.Internet Explorer URLs ............................................................................................................................ 35 9.System Optimization ............................................................................................................................... 36 Applications and Processes System Performance Backup Facts 10.System Security ..................................................................................................................................... 41 Account Policies Facts Auditing Facts Security Templates Facts IE Security Facts IE Certificates Piratez Book Page3
Slide 4: Administering Windows XP Professional From Piratez Thank you for your interest in this release. This book was written using Testout study guide CDs so the content doesn’t express the idea of Piratez. So if you find any problem don’t contact us ; but www.testout.com . This product is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. This is freely distributable and available for use by anyone, without restrictions. With this there is no need to worry about piracy. We encourage you to make as many copies as you like and to give them to your friends and colleagues. Everyone is permitted to copy and distribute verbatim copies of this document, but changing it is not allowed. You are under no moral or legal obligation to pay anyone for this right to use this. Wish you all the best for your 70-270 exam ! -Piratez Piratez Book Page4
Slide 5: Administering Windows XP Professional 1.INSTALLATION Installing Windows XP Facts Windows XP requires the following for a successful installation: Pentium 233 MHz or greater (300 MHz recommended) 1.5 GB free disk space 64 MB RAM (128 recommended) Super VGA CD-ROM or DVD drive Keyboard and mouse To start the installation, use: Winnt.exe to start installation from a DOS environment. Winnt32.exe to start installation from within a 32-bit environment. The following table lists common switches to use with the installation programs. Switch /makelocalsource /dudisable /duprepare /dushare /u /udf /s /checkupgradeonly /debug[level]:XPdebug.log Purpose Copies installation files from the CD-ROM Disables dynamic updates during installation Prepare downloaded update files for use during installation Start the installation with downloaded update files Indicates use of an unattended answer file Indicates the use of a uniqueness database file Specifies a path to source files Verifies upgrade compatibility with XP Creates a debug log for an XP Professional installation Keep in mind the following facts about performing an installation: Before starting the installation, check the Hardware Compatibility List (HCL) to verify your hardware is compatible with Windows XP. Before starting the installation, disable virus checking in the BIOS. Gather all information about the computer and the network (such as the domain name) before starting the installation. During installation, press F5 to install a custom HAL. During installation, press F6 to install a custom SCSI driver. After installation, you must activate your copy of Windows within 30 days. Activation does not send personal information to Microsoft (it isn't the same as registration). Activation can be done through the Internet or over the phone. Upgrading to Windows XP Facts Before beginning the installation, run Winnt32.exe /checkupgradeonly to verify the system compatibility with Windows XP. The results of the check are saved in the %systemroot%\upgrade.txt file. To preserve system settings during a clean install, use: Piratez Book Page5
Slide 6: Administering Windows XP Professional Files and Settings Transfer Wizard: A GUI tool for saving and restoring personal settings. Scanstate and Loadstate utilities: Use Scanstate to save the settings to a network folder. Use Loadstate to load the saved settings on the new machine. The following operating systems can be upgraded to Windows XP Professional: Windows Windows Windows Windows Windows 98 (including SE) ME NT 4.0 Workstation (load the latest service pack before upgrading) 2000 Professional XP Home Edition Network Installation Facts You should know the following facts about Remote Installation Services: An RIS server must have the following components installed on it: o DHCP o DNS o RIS o Active Directory Use the Rbfg.exe (Remote Boot Disk Generator) file to create a boot disk for non-PXE compliant network adapters. The boot disk simulates the PXE boot process. The file is located in the RemoteInstall\admin\i386 folder on the RIS server. On the workstation, be sure to enable network boot in the BIOS. Use the Riprep.exe file to create the image of the reference computer. To perform a network installation without RIS: 1. Copy the source installation files to a shared network drive. 2. If necessary, update the installation files with service packs or hotfixes. 3. Execute Winnt or Winnt32 from the network share. To use dynamic updates during an installation, download the updates to a network share. Use the following switches with the Winnt or Winnt32 command to apply dynamic updates during the installation: Switch /Duprepare:[path to downloaded updates] /Dushare:[path to downloaded updates] /Dudisable Function Prepares the updates for use during installation. Starts the installation with the downloaded update files. Prevents the dynamic update from occurring. To apply a service pack to the source installation files, use the Update.exe –s:[network_share] command and switch. This applies the service pack changes to the installation files in the network share. Automated Installation Facts Windows provides the ability to perform an unattended installation from a CD-ROM. To perform an unattended installation from a CD-ROM, the following conditions must be met: The computer must support booting from a CD-ROM, and must adhere to the El-Torito nonemulation specification. Piratez Book Page6
Slide 7: Administering Windows XP Professional The unattended answer file must be renamed to Winnt.sif and copied to a floppy disk so Setup can access it. When Setup displays the message that it is examining the hardware configuration, insert the floppy disk containing the Winnt.sif file. The answer file must contain a valid [Data] section with the following entries to the unattended answer file: o UnattendedInstall=Yes - Value must be set to "yes". o MSDosInitiated=No - Value must be set to "no" or Setup will stop during the graphical portion of Setup. o AutoPartition=1 - If the value is set to 1, the installation partition is automatically selected. If the value is set to 0 (zero), you are prompted for the installation partition during the text portion of Setup. You can also automate installation by preparing a disk image. You then duplicate the disk image to a new hard drive and boot the system. Use the following files to prepare an automated installation using an image: File Sysprep.exe Setupcl.exe Sysprep.inf Function Prepares a system for duplication Runs a mini-setup wizard when the duplicated drive is booted An optional answer file that automates the mini-setup wizard. Can be copied to a floppy disk. Note: These files belong in the Sysprep folder at the root of the system drive. Troubleshooting Installation Facts Use the /debuglevel:logfile switch to create an installation debug log. The default debug level is 2. The default log file is C:\%systemroot%\Winnt32.log. The log levels are as follows: Level 0 1 2 3 4 Report Severe Errors Errors Warnings Information Detailed information for debugging You can use System File Checker (Sfc.exe) to verify the integrity of protected system files if an installation appears unstable. You can use the following switches with the Sfc command: Switch /Scannow /Scanboot /Revert /Cachesize = size Function Perform a scan immediately Configures the operating system to perform a scan every time the operating system boots Changes the scan behavior back to the default Configures how much disk space can be used to store cached versions of protected system files To uninstall a service pack or hotfix from the command line, run Spuninst.exe from the service pack or hot fix uninstall folder. Use the following switches with Spuninst: Switch -u -f -z -q Function Unattended mode Force other apps to close at shutdown Do not reboot when complete Quiet mode (no user interaction) Piratez Book Page7
Slide 8: Administering Windows XP Professional You can revert to a previous operation system after upgrading to Windows XP. You can also use Add/Remove Programs wizard to uninstall a Windows XP installation that was performed as an upgrade on a Windows 98 computer. To isolate a driver causing an installation to fail, add the /Sos switch to the Boot.ini file. This loads the drivers individually, allowing you to isolate the bad driver. Piratez Book Page8
Slide 9: Administering Windows XP Professional 2.Users & Groups User Preferences Facts Accessibility Options The following table summarizes the accessibility features you can configure with the Accessibility Options applet. Option StickyKeys FilterKeys ToggleKeys SoundSentry ShowSounds High Contrast MouseKeys SerialKey Description Use Shift, Ctrl, or Alt in combination with other keys by pressing one key at a time Ignore repeated keystrokes Associate sounds with Caps Lock, Num Lock, and Scroll Lock keys Associate visual clues with sounds Display captions for sounds made by programs Change background and text colors to improve readability. You can also configure visual settings with the Display applet. Control the mouse pointer with the number keypad Configure alternate mouse or keyboard input device Regional and Language Options One way to accommodate different languages in Windows XP is to select the correct version. There are two general versions available: Localized Windows--Windows ships localized into a single language. All menus, dialogs, and buttons have been translated to the target language. Multilanguage Windows--Windows includes multiple languages, letting users switch between localized versions of Windows without reinstalling. In other words, users can see menus, dialogs, and buttons in their language of choice. The following table summarizes the regional and language support for different Windows versions. Feature Change date, time, measurement display Create, view, and edit documents in multiple languages (including East Asian and right-to-left languages) Display Windows menus and dialogs in multiple languages Built-in and Predefined User Accounts Windows XP Professional includes two built-in user accounts: Administrator. Has all system rights and privileges to manage the local computer. Guest. Has very limited rights and privileges. Keep in mind the following facts about the built-in user accounts: You cannot delete built-in user accounts. As a best practice, you should rename these accounts. This makes it harder for unauthorized users to guess a user account name to use. By default, the Guest account is disabled (it cannot be used for logon). Localized Windows (Single-language) Yes Yes No Multilanguage Windows Yes Yes Yes Piratez Book Page9
Slide 10: Administering Windows XP Professional Predefined user accounts are created during the installation of certain software components. These are normal user accounts with a specific name that are used by the software to perform system or other functions. Although you can delete or rename these accounts, the software that created them might not function properly if you do. Following is a list of some of the most common automatically-created user accounts. User Account Name HelpAssistant IUSR_ComputerName IWAM_ComputerName SUPPORT_IDNumber Purpose Lets another user provide remote assistance. Lets network users access the computer anonymously when the computer is acting as a Web server. Used by the computer to run programs when it is acting as a Web server. A vendor user account used to provide help and support. Local User Account Best Practices As you create and manage local user accounts, keep in mind the following recommendations: When you create a new account, set a password to protect the account. Do not make the password something easy to guess (for example, do not use the logon name for the password). Force the user to change the password at next logon. This forces the user to replace the assigned password with one they choose. Disable accounts that won't be used for a while. If a user leaves and is replaced by someone else with similar access needs, rename the existing account (rather than deleting the old account and creating a new one). If you accidentally delete a user account, restore it from backup rather than creating a new one with the same name. Creating a new account results in a user account with a different SID. Built-in Local Groups When you install Windows XP, the following local groups are created automatically. These groups have preassigned rights, permissions, and group memberships. You can rename these groups, but cannot delete them. Group Name Administrators Capabilities Members have complete and unrestricted access to the computer, including every system right. The Administrator user account and any account designated as a "computer administrator" is a member of this group. Members can back up and restore files (regardless of permissions), log on locally, and shut down the system. Members cannot change security settings. Members can: Create user accounts and modify and delete accounts they create Create local groups and remove users from local groups they create Remove users from the Power Users, Users, and Guests groups Change the system date and time Install applications Members cannot: Change membership of the Administrators or Backup Operators groups Take ownership of files Back up or restore files Load or unload device drivers Manage security and auditing logs Members can use the computer but cannot perform system administration Backup Operators Power Users Users Piratez Book Page10
Slide 11: Administering Windows XP Professional tasks and might not be able to run legacy applications. Members cannot share directories or install printers if the driver is not yet installed. Members cannot view or modify system files. Any user created with Local Users and Groups is automatically a member of this group. User accounts designated as "limited use" accounts are members of this group. A user account created as a "computer administrator" is made a member of this group. Members have limited rights (similar to members of the Users group). Members can shut down the system. Guests Windows XP also includes the following local groups. Although these groups exist, you should not modify their membership. Network Configuration Operators Remote Desktop Users Replicator Implicit Local Groups Windows XP has some special groups (sometimes called implicit groups or special identities) that act as variables to represent either a set of users or a set of programs running on the computer. The identity and membership of these groups is dynamically configured, so they are not listed in Local Users and Groups. In many cases, user accounts are dynamically made a member of these groups when users perform certain actions (such as logging on or creating a file). Group Name ANONYMOUS LOGON AUTHENTICATED USERS CREATOR GROUP CREATOR OWNER DIALUP Everyone INTERACTIVE NETWORK REMOTE INTERACTIVE LOGON Membership obtained by... Logging on without a user name and password (anonymous logon is commonly permitted if the computer is acting as a web server) Logging on by supplying a user name and password Creating an object Creating an object (such as a file) Connecting to the computer through a dial-up connection Gaining access to the computer except through anonymous logon Logging on interactively (also called logging on locally) through the computer console Logging on to the computer through a network connection Logging on to the computer through a remote desktop connection Except the Everyone group, you can recognize these groups because their names are written in all caps. Local Group Facts As you work with local groups, recommendations: Whenever possible, use built-in groups to assign rights and permissions. For example, to allow someone to back up and restore the system, make the user account a member of the Backup Operators group. Use caution in modifying the default rights and permissions assigned to built-in groups. When assigning security, make user accounts members of groups, then assign the rights or permissions to the group rather than the user accounts. Additional facts about managing local groups: Piratez Book Page11
Slide 12: Administering Windows XP Professional Deleting a group does not delete the user accounts that are members of the group. Removing a user account from a group does not delete the group or the user account. You can make domain users and groups members of local groups. You cannot remove the Administrator local user account from the Administrators group. You cannot remove the Guest user account from the Guests group. When you join a domain, some domain accounts are automatically made members of local groups. User Profile Management Tasks The following list describes some common profile management tasks and the recommended method for completing them. To . . . Create a new profile Edit an existing profile Create Start Menu or Desktop shortcuts Copy a profile Make a mandatory user profile Make a roaming user profile Assign a specific profile Delete a profile Do . . . Log on as a user without a profile. User profiles are created automatically, using the Default Users profile as a template. (You can also set access permissions on a copied profile for use as a new profile.) Log on as the user, then use the Windows interface to modify the desktop, Start Menu, taskbar, and other preferences. Copy the desired shortcuts to the appropriate folder within the user profile. Use the User Profiles tool to copy the profile to a new location. If you simply copy the subfolders to a new location, registry settings and permissions will not be properly modified. Note: You cannot copy the profile of a logged on user. Use Explorer to rename the Ntuser.dat file to Ntuser.man. Copy the profile to a network share. Use the Profile tab in the user account properties to enter the path to the user's roaming profile. Edit the properties of the user account (either local or domain user) to identify the specific profile (either to a user roaming or otherwise) to use. Use the User Profiles tool. Do not simply delete the folder as registry settings will not be modified appropriately. Note: You cannot delete the profile of a logged on user. Folder Redirection Facts Keep in mind the following facts about redirecting folders: End users can only redirect the following folders: My Documents, My Music, My Pictures, and My Videos. Group Policy can only redirect the following folders: Application Data, Desktop, My Documents, My Music, My Pictures, My Videos, and Start Menu. You cannot redirect folders using local Group Policy. Use the %username% variable to redirect folders to unique parent folders based on user name. You can redirect folders to different locations based on group membership. When you redirect folders, the default is to copy the existing folder contents to the new location. Redirecting folders does not delete the existing folder or prevent data from being stored in the folder. It only redirects the shortcut that points to the target folder. By default, users are given the necessary permissions to manage their redirected folders. Group Policy Facts Piratez Book Page12
Slide 13: Administering Windows XP Professional Group policy is a tool used to implement system configurations that can be deployed from a central location through GPOs (Group Policy Objects). Group Policy facts: GPOs contain hundreds of configuration settings. GPOs can be linked to Active Directory sites, domain, or organizational units (OUs). GPOs include computer and user sections. Computer settings are applied at startup. User settings are applied at logon. A GPO only affects the users and computers beneath the object to which the GPO is linked. Group policy settings take precedence over user profile settings. A local GPO is stored on a local machine. It can be used to define settings even if the computer is not connected to a network. GPOs are applied in the following order: 1. Local 2. Site 3. Domain 4. OU If GPOs conflict, the last GPO to be applied overrides conflicting settings. The Computers container is not an OU, so it cannot have a GPO applied to it. Group policy is not available for Windows 98/NT clients or Windows NT 4.0 domains. You can use a GPO for document redirection, which customizes where user files are saved. (For example, you can redirect the My Documents folder to point to a network drive where regular backups occur. Folder redirection requires Active Directory-based group policy.) Configuring a domain group policy to delete cached copies of roaming user profiles will remove the cached versions of the profile when a user logs off. To manually refresh group policy settings, use the Gpupdate command with the following switches: Switch No switch /target:user /target:computer Function Refresh user and computer-related group policy. Refresh user-related group policy. Refresh computer-related group policy. Piratez Book Page13
Slide 14: Administering Windows XP Professional 3.Installing Hardware Installing Devices When installing devices: Begin by adding the device to the system or plugging the device in. Windows automatically detects and installs drivers for Plug and Play devices. For undetected legacy devices, you might need to: o Run the setup program that came with the device. o Use the Add New Hardware wizard to install a device driver manually. o Manually set IRQ, DMA, or I/O addresses o Manually select and install the driver IDE Devices Keep in mind the following facts about configuring IDE devices: 1. Virtually every computer has two IDE host bus adapters integrated onto the motherboard. 2. Each adapter supports a maximum of two devices. 3. When two devices per adapter are configured, use jumpers to identify the master and slave devices. 4. The CMOS and BIOS typically auto-detects the devices attached to each adapter. 5. Configure the BIOS to identify which devices can be used to boot the computer. SCSI Devices Keep in mind the following facts about configuring SCSI devices: 1. Some computers have a built-in SCSI host bus adapter. For other computers, install an adapter card in the PCI bus. 2. Devices are connected in a chain. Most host bus adapters allow for an internal chain of devices 3. 4. 5. 6. and an external chain of devices. Most SCSI implementations have a limitation of seven devices (including the host bus adapter). Each device (including the host bus adapter) in the chain must have a unique ID number. This number might be set with switches or through software. The end of the SCSI chain must be terminated. Some devices are self-terminating. Other devices require a special termination plug. Modify the system BIOS to boot from a SCSI device (set the device type to 0 or not installed). Parallel Devices Keep in mind the following facts about working with parallel devices: 1. Parallel ports originally supported only printers. You can now attach a wide variety of devices to the parallel port. 2. Windows identifies each parallel port with the designation LPT1, LPT2, etc. 3. Parallel ports operate in three different modes: SPP (standard), EPP (enhanced, to support Piratez Book Page14 non-printer devices), and ECP (extended, for improved printer support). Virtually all computers support all three modes. 4. In most cases, Windows automatically detects the device connected to a parallel port and sets the mode accordingly. 5. To configure the port mode manually (such as to disable EPP for a port), edit BIOS settings.
Slide 15: Administering Windows XP Professional Serial Devices Keep in mind the following facts about configuring serial devices: 1. 2. 3. 4. 5. 6. Most computers have one or two serial ports. Modems and direct computer-to-computer connections typically use serial ports. Windows allocates resources to serial devices using COM1, COM2, etc. designations. Windows XP supports up to 256 COM ports. For each serial port, configure the data speed, data/stop bits, parity, and flow control settings. Conflicts might occur if two devices share the same COM port number. USB Devices Following are some facts to keep in mind while configuring USB devices: 1. USB devices connect through hubs to form a tree bus structure. 2. Hubs are either self-powered or bus-powered (receiving their power from another hub). 3. Bus-powered hubs have a maximum of four ports, and supply a maximum of 100 mA of power per port. 4. Self-powered hubs supply up to 500 mA per port and can have many ports. 5. USB devices can be self-powered or hub-powered (receiving their power from the hub). 6. Connect low powered devices (such as a mouse or keyboard) to either self-powered or buspowered hubs. 7. Connect high-powered devices (such as video cameras or scanners) to either a self-powered hub or plug the device in to its own power supply. 8. The USB bus is self-terminating and automatically assigns IDs to each device. FireWire Devices FireWire (also called IEEE 1394) is similar to USB, but is targeted mainly towards audio/video data transfer. Keep in mind the following facts about FireWire devices: 1. FireWire is typically used for video cameras and devices requiring high-speed, guaranteed bandwidth. 2. FireWire devices are connected in a chain. 3. The controller automatically assigns device IDs. No termination is needed. 4. Windows detects and configures FireWire devices automatically as they are plugged in. Wireless Devices Keep in mind the following facts regarding configuring wireless devices: 1. Two common wireless interfaces include IrDA (infrared) and BlueTooth (radio frequency). 2. Common IrDA devices include the mouse, keyboard, and PDAs. BlueTooth devices are typically used for networking (such as to allow a laptop to connect to a network without wires). 3. Both the host computer and communicating devices require a transmitter/receiver. 4. With IrDA, devices must be close and have a direct line of sight path. With BlueTooth, devices can be farther away (up to 10 meters) and separated by walls or other objects in the path. Drivers To update drivers: Piratez Book Page15 1. Use Windows Update to automatically check for new drivers. 2. Download the new driver and run the program to install it. 3. Download the new driver and use Device Manager to update and install the new driver.
Slide 16: Administering Windows XP Professional To control how unsigned drivers are installed on the system, use the following settings: Block (prevents unsigned driver installation) Warn (allows installation, but with an error message) Ignore/Silently Succeed (install) To protect against unsigned drivers, 1. Enforce driver signing on the system through the System applet or Group Policy. 2. Use group membership and user rights to prevent normal users from installing drivers (Power Users or Administrators only can install drivers). available. 3. The Hardware Compatibility List (HCL) includes all devices for which a signed driver is 4. Driver Rollback allows you to restore an original driver when a new driver causes system problems. File Verification Programs The following table summarizes the file verification tools you can do to verify driver signatures and file integrity. Program Sigverif.exe Driverquery.exe /si Msinfo32.exe Sfc.exe /scannow Features GUI-based tool that searches for unsigned files. By default, it searches only the Windows directory (click the Advanced button to search other locations). The program returns a list of files without digital signatures. Command-line tool that checks the digital signatures of drivers that are in use. Use the /si switch to request the signature status of the drivers. The report lists each device, the .inf file for the device, and the signed status of the driver. GUI-based tool that displays the list of devices and information about each device (including the driver, driver date, and signature status). The report shows every installed device and the signed status of the drivers. Tool that scans system files to ensure that they have not been replaced or corrupted. Use the /scannow switch to force an immediate check of the system. Use the tool to automatically replace bad files. Multiple Monitors Hardware requirements for using multiple monitors: 1. Video card with dual monitor support OR multiple video cards 2. One card designated as the primary card 3. Cards must be AGP or PCI (ISA will not work) Special considerations for using multiple monitors: 1. Make sure the video card driver supports multiple monitors (upgrade the driver or replace the device) 2. Not all applications support multiple monitors (they might display only on the primary monitor) Multiple Processors Piratez Book Page16 3. Use the Settings tab in the Display properties to configure multiple monitors
Slide 17: Administering Windows XP Professional Keep in mind the following facts about multiple processors: The Hardware Abstraction Layer (HAL) controls communication between the kernel (operating system) and the hardware. Multiple processor support depends on whether the HAL is designed for uniprocessor or multiprocessor support. Use the multiprocessor HAL to utilize both processors. If you want to run multiple processors, you can use Device Manager to upgrade the HAL driver to support multiple processors. Power Management Windows XP supports two types of power management: Advanced Power Management (APM): Power management controlled by the BIOS Advanced Configuration Power Interface (ACPI): Windows controls the power management ACPI offers a number of advantages over APM, including: Control of power management for individual devices though Device Manager Support for hibernation and stand-by modes Support for power schemes to customize power options Support for laptop power management ACPI support is enabled by the hardware abstraction layer (HAL). The ACPI HAL can be installed only if the BIOS supports ACPI. If the non-ACPI HAL is installed (for example if you forced an install of the non-ACPI HAL), you must reinstall Windows to replace the HAL. If necessary, enable ACPI support in the BIOS. Hardware Profile Considerations To create a new profile, 1. Copy an existing profile. 2. Reboot, selecting the new profile. 3. Use Device Manager to enable or disable devices for the current profile. Use the Hardware Profile tool to manage profiles: Move profiles up or down in the list. The top profile is the default. Set the profile menu timer. Set the timer to 0 to hide the menu (if the menu is hidden, press the Spacebar during boot to show the menu). You can customize the profile menu by removing profiles from the menu. The following table lists some cases when hardware profiles are or are not needed. When not to use a hardware profile If you are adding or removing hot-swap components If you want to disable a device under all When to use a hardware profile If you need to conserve laptop power under specific conditions If you need to force a specific device to be used Piratez Book Page17
Slide 18: Administering Windows XP Professional conditions If you need to permanently uninstall a specific device If a laptop uses only a docked and an undocked state at a specific time If you want reduce the time delay the system needs to select the correct device in a specific situation Piratez Book Page18
Slide 19: Administering Windows XP Professional 4.Networking Network Components The following tables list the protocols, clients, and services provided by Microsoft. Other vendors (such as Novell) might provide additional networking components. Protocols Protocol Internet Protocol (TCP/IP) NWLink IPX/SPX/NetBIOS Compatible Transport Protocol Network Monitor Driver Clients Client Client for Microsoft Networks Client Service for NetWare Services Service File and Printer Sharing for Microsoft Networks QoS Packet Scheduler Service Advertising Protocol TCP/IP Configuration Settings The following table summarizes many of the configuration settings for a TCP/IP network. Parameter IP address Subnet mask Default gateway Host name DNS server WINS server MAC address Purpose Identifies both the logical host and logical network addresses. Identifies which portion of the IP address is the network address. Identifies the router to which packets for remote networks are sent. Identifies the logical name of the local system. Identifies the DNS server that is used to resolve host names to IP addresses. Identifies the WINS server that is used to resolve host names to IP addresses. Identifies the physical address. On an Ethernet network, this address is burned in to the network adapter hardware. Use Enables a computer to share its resources with other network clients Service that prioritizes TCP/IP traffic, enabling a higher priority for time-sensitive communications Protocol used with NetWare to locate services on an IPX/SPX network Use Client software to access resources on Microsoft networks Client software to access resources on NetWare networks running IPX/SPX Use Routable protocol used on the Internet and the default protocol for Windows XP Microsoft's implementation of IPX/SPX for connecting to NetWare servers Enables the computer to capture network communication statistics Keep in mind the following regarding TCP/IP configuration: All computers must be assigned a unique IP address. Piratez Book Page19
Slide 20: Administering Windows XP Professional Hosts on the same physical network should have IP addresses in the same address range. The subnet mask value for all computers on the same physical network must be the same. Configure the default gateway value to enable internetwork communication. The default gateway address must be on the same subnet as the host's IP address. By default, all Windows computers try to use DHCP for TCP/IP configuration information. APIPA is used to automatically generate an IP address if the DHCP server is unavailable and if no alternate address is configured. The APIPA range is 169.254.0.1 to 169.254.255.254 with a mask of 255.255.0.0. If the computer assigned itself an IP address (using APIPA), this means the computer could not contact a DHCP server. Use an alternate IP address to use DHCP on one network and static addressing on another without reconfiguring the connection. When you configure a static IP address, you disable DHCP and APIPA. When you configure an alternate IP address, APIPA is no longer used. APIPA does not set the default gateway or name server address values. Rely on APIPA only on a small non-routed network. Private IP addresses do not need to be registered, and fall within the following ranges: o 10.0.0.0 to 10.255.255.255 o 172.16.0.0 to 172.31.255.255 o 192.168.0.0 to 192.168.255.255 Troubleshooting TCP/IP Use the following tips to troubleshoot TCP/IP: Use Ipconfig /all to verify your IP address, subnet mask, default gateway, and other IP configuration values. If the IP address is in the APIPA range (169.254.0.0 to 169.254.255.254), the computer could not contact a DHCP server. Use Ipconfig /renew to try contacting the DHCP server again. Use Ping (Packet Internet Groper) to send small packets to a computer to see if the computer responds. Microsoft recommends the following use of Ping: 1. Ping the loopback address (127.0.0.1). This verifies that the TCP/IP protocol stack has been properly installed. 2. Ping the local IP address assigned to the machine. This verifies communication to the NIC. 3. Ping the default gateway. This verifies connectivity to the default gateway or to another machine on the local network. This verifies that the local network is accessible. 4. Ping a remote host. This checks the connectivity between the default gateway and the remote host. Use Tracert to see the route packets take through an internetwork between two devices. Use Pathping to view the route of the connection and the connectivity response time. This can help identify where communication latency occurs. Use the Arp -d * command to remove all dynamic ARP entries from the ARP list. (Arp -d clears the ARP cache.) Use the Windows system logs to track DHCP service startup and shutdown as well as critical errors. Name Resolution Facts Microsoft uses one or both of the following methods for performing name resolution: Windows Internet Name Service (WINS) is Microsoft's service to resolve names dynamically to IP addresses using NetBIOS. WINS is still used by legacy machines. Piratez Book Page20
Slide 21: Administering Windows XP Professional Domain Name Service (DNS) dynamically registers clients and uses client information to register IP addresses. If your network is running only Windows 2000/XP/2003 systems, you can disable NetBIOS name resolution. To troubleshoot name resolution problems: Confirm that it is not a TCP/IP problem by pinging the IP address. If pinging the address succeeds but pinging the name fails, the problem is with the name resolution system. Run Ipconfig /all to verify DNS server addresses. Run Nslookup to see if you get an IP address from the DNS server. Verify the DNS and WINS server configurations. Check the services on the DNS and WINS servers to see that they are running. Check DNS registration. If you need to renew the DNS registration, do the following: o Run Ipconfig /registerdns to renew a DNS name. o Run Nbtstat -RR to renew a NetBIOS name. Flush the local host name resolution cache using: o Ipconfig /flushdns for DNS. o Nbtstat -c or Nbtstat -R for NetBIOS. Dial-up Connection Facts There are two types of dial-up modems: Standard analog modem (up to 56 Kbps) ISDN modem ISDN modems use the following channels over normal analog lines: Two B channels of 64 Kbps each. The two channels operate independently, and they are associated with separate phone numbers. Each channel must be configured separately. The third channel is a 16 Kbps D channel which is used to control the two B channels. When configuring dial-up, you can configure the following additional options: Callback security--The server disconnects the user after authentication then immediately calls the user back. The server can use a preset phone number for each user, or the user can enter a callback phone number after authentication. Multi-link--The ability to integrate multiple connections into a single logical connection in order to increase the overall bandwidth. Both the client and the server need to be configured to accept multi-link connections. You cannot use multi-link with callback. Remote Authentication Protocols Windows XP supports the following remote authentication protocols. Method Password Authentication Protocol (PAP) Challenge Handshake Description Authentication is done by comparing a user name and password to a table with paired user names and passwords on the network. PAP does not support secure passwords. A server sends a challenge message to a peer. Based on the challenge message, the peer calculates a value using a hash, a number generated algorithmically from a Piratez Book Page21
Slide 22: Administering Windows XP Professional Authentication Protocol (CHAP) Extensible Authentication Protocol (EAP) string of text, and returns the value to the server. The server checks the value against its own calculation. If the values match, the peer is authenticated. Microsoft has two versions of CHAP: MS-CHAP and MS-CHAP v2. CHAP, MS-CHAP, and MSCHAP v2 require secure passwords, but only MS-CHAP and MS-CHAP v2 support data encryption. EAP supports several authentication methods, including smart cards, certificates, onetime passwords, and public key authentication. EAP supports secure passwords and data encryption. VPN Tunneling Protocols Windows XP Professional supports two different VPN tunneling protocols: PPTP and L2TP. By default, VPN connections for Windows XP Professional are configured to use both PPTP and L2TP. The client will negotiate with the VPN server to select the tunneling protocol to use for the connection. Protocol Point-to-Point Tunneling Protocol (PPTP) Layer Two Tunneling Protocol (L2TP) Common Port Numbers This table lists the services and port numbers included with ICF. Custom entries can be created to allow other types of traffic. Service File Transfer Protocol (FTP) Incoming L2TP VPN Incoming PPTP VPN Internet Mail Access Protocol version 3 (IMAP3) Internet Mail Access Protocol version 4 (IMAP4) IP Security (IKE) Post Office Protocol (POP3) Remote Desktop Secure Web (HTTPS) Telnet Web Server (HTTP) ICS and ICF Facts With Internet Connection Sharing (ICS), most configuration tasks are completed automatically. When using ICS: The ICS system is configured as a NAT router, a limited DHCP server, and a DNS proxy (name resolution requests from the private network are forwarded to DNS servers on the Internet). The IP address for the private interface is automatically changed to 192.168.0.1 with a mask of 255.255.255.0. The default gateway of the ICS system is set to point to the Internet connection. Hosts on the private network should use DHCP for address and DNS server information. The ICS system uses DHCP to deliver the following information to hosts on the private network: o IP address in the range of 192.168.0.0 with a mask of 255.255.255.0. o DNS server address of 192.168.0.1 (the private interface of the ICS system). o Default gateway address of 192.168.0.1. Port Number 21 1701 1723 220 143 500 110 3389 443 23 80 Protocol TCP UDP TCP TCP TCP UDP TCP TCP TCP TCP TCP Description Uses standard authentication protocols Uses MPPE for encryption Is supported by most operating systems and servers Can use certificates for authentication Uses IPSec for encryption (requires certificates) Only supported by Windows 2000/XP/2003 Piratez Book Page22
Slide 23: Administering Windows XP Professional Do not use DHCP servers, DNS servers, or Active Directory on your private network. Keep in mind the following details when working with ICF: Enable ICF on the Internet connection, not on the private connection. Doing so can disable communication with hosts on the private network. By default, the firewall allows all outgoing Web traffic and responses but blocks all incoming traffic. To allow incoming Web traffic, open ports in the firewall based on the services you want to allow in. If the incoming service is hosted by a computer on the private network, redirect the incoming port to the private host. Remote Services Facts Keep in mind the following details regarding Remote Assistance. Both the novice (person requesting assistance) and the expert (person giving assistance) computers must be running Windows XP (either Home or Professional). Generally, the novice must initiate the invitation. If Active Directory is used, the expert can initiate the Remote Assistance connection. Invitations require a password (unless Instant Messaging is used) and have an expiration time. Expired invitations cannot be answered. When sending an invitation, do not include the password in the invitation text. Communicate it in some other way. To allow inbound Remote Assistance invitations to cross through a firewall, open port 3389. Disable Standby and Hibernation modes to prevent session termination. The helper cannot copy files from a user's computer. The user must explicitly send any files the helper may need. The user can take control the computer at any time by pressing the Esc key, Ctrl+C, or clicking Stop Control. Keep in mind the following details when working with Remote Desktop. Host computers must be running Windows XP Professional. Client computers require client software to make the connection. This software is included with Windows XP, but must be installed separately on other Windows versions. For Web access, client software is downloaded and installed automatically through an Active X control (if required). The user account that is used for the Remote Desktop connection must have a password. If one is not set, the connection cannot be established. If a user is logged on to the host computer (or if the computer is locked), the remote client must log on using the current user account or the Administrator account. The user account for the remote connection must be a member of the Remote Desktop Users group or the Administrators group (or user rights must be modified in Group Policy). To allow incoming Remote Desktop sessions through a firewall, open port 3389. If you are using the Web connection for Remote Desktop, keep in mind the following: The host computer must be running IIS. The client computer must be running a Windows operating system (Windows 9x or higher) with Internet Explorer 4.0 or higher. Use a URL formatted as http://computername/tsweb to make the connection. Piratez Book Page23
Slide 24: Administering Windows XP Professional After the connection is made, you can use the browser to access any other Remote Desktopor Terminal Services-enabled computers on the private network. You can use authentication and Web permissions in IIS to control access to the Remote Desktop Web connection. Piratez Book Page24
Slide 25: Administering Windows XP Professional 5.Disk Management File System Facts The following table indicates which file systems support which capabilities. Feature Long file names Larger than 2 GB/4 GB partitions Smaller clusters Enhances file security through permissions Folder and file level encryption Folder and file level compression Disk quotas FAT X FAT32 X X X NTFS X X X X X X X Use the Convert.exe utility to modify the file system without reformatting and losing data. To convert the C:\ drive to NTFS, use the following command: convert C: /fs:ntfs Basic and Dynamic Disks Keep in mind the following when using basic disks. A basic disk has a limit of four partitions, only one of which can be an extended partition. One primary partition must be marked active. Most operating systems can recognize only one primary partition. All other primary partitions are invisible. (Windows NT/2000/XP/Server 2003 can recognize multiple primary partitions.) The active primary partition is represented with one drive letter (C:). The extended partition can be divided into multiple logical drives (up to 26). Keep in mind the following when using dynamic disks. Windows 2000/XP/Server 2003 recognize dynamic disks. Volumes on dynamic disks are like partitions and logical drives on basic disks. A volume can be made of non-contiguous space on a single drive or space taken from more than one drive. You cannot install the operating system on a dynamic disk. You can, however, upgrade a basic disk containing the operating system to dynamic after installation. Keep in mind the following points as you plan whether to implement basic or dynamic disks. A hard disk must be either basic or dynamic; it cannot be both at once. Windows 2000/XP/Server 2003 use basic storage by default. MS-DOS and all versions of Microsoft Windows support basic storage. Dynamic storage was new to Windows 2000 and previous Windows operating systems cannot use it (this is especially important if you plan to multi-boot to other operating systems). Dynamic storage is not supported on portable computers because they normally have only one internal hard drive and cannot take advantage of advanced dynamic storage features. To convert a basic disk to a dynamic disk, right click the volume in Computer Management and choose Convert to dynamic disk. Or, use the Diskpart command at the command line. Piratez Book Page25
Slide 26: Administering Windows XP Professional Volume Characteristics The following table summarizes the volume types supported on Windows XP Professional and their characteristics. Volume Type Simple volume Extended volume Spanned volume Striped volume Characteristics Contains a single, contiguous block of space from a single hard disk. Contains space from multiple areas on the disk. An extended volume that spans two disks is a spanned volume. Combines areas from two or more disks into one storage unit. Fills the first area, then the second, and so on. Does not provide fault tolerance. If one hard disk fails, you lose all data. Cannot contain system or boot files. Uses storage areas on several different disks. Improves performance by writing to multiple disks simultaneously. Uses disk areas similar in size. The amount of space used on each disk is equal to the smallest area. Saves data from a single file on multiple disks. Is not fault-tolerant. If one hard disk in the set fails, you lose all data on all disks. Cannot contain system or boot files. Note: Only dynamic disks support extended, spanned, or striped volumes. Mirrored and RAID volumes are supported only on server versions of Windows. These volume types provide fault tolerance and improve performance. Volume Mount Point Facts Be aware of the following conditions for using volume mount points. Empty folder must be in NTFS partition. Volume to be mounted can be in Xp accessible file format.(FAT,FAT32,NTFS) You can use either partitions on basic disks or volumes on dynamic disks. The folder on the source partition must be empty. The target partition must not have a drive letter. Multiple folders can reference the same target partition. Designing Disks for Multiple Operating Systems For a system that boots to multiple different operating systems (for example to both Windows 98 and Windows XP), you will need to plan your storage space so that the drives are accessible to the appropriate operating system. In general, be sure to select the disk type (basic or dynamic) and file system that is common to both operating systems. Keep in mind the following: Only Windows 2000/XP supports dynamic disks and volumes. Use basic disks and partitions for operating systems other than Windows 2000/XP. Only Windows 2000/XP supports its version of NTFS. Select FAT or FAT32 for other operating systems. Select FAT32 over FAT if possible. Operating System MS-DOS FAT X FAT32 Windows 2000/XP NTFS Piratez Book Page26 The following table indicates which file systems are compatible with which operating systems.
Slide 27: Administering Windows XP Professional Windows Windows Windows Windows Windows 3.1 95a 95b/98/Me NT 2000/XP X X X X X X X Limited support on NT 4 with SP4 X When installing Windows 2000/XP and other operating systems on the same computer, as a rule you should install the other operating systems first, then install Windows 2000/XP last. Doing so prevents Windows 2000/XP startup files from being corrupted. Microsoft recommends the following installation order: 1. 2. 3. 4. MS-DOS Windows 95/98/Me Windows NT Windows 2000/XP Boot.ini Facts The Boot.ini file is responsible for the following operations: Launching the menu for operating system selection during startup Pointing to the system files for the selected operating system Identifying the controller, hard disk, and partition where the system files are located The ARC path locates the system file and contains the following elements: Entry MULTI(x) or SCSI(x) DISK(x) Meaning and Use Identifies the controller location. Use multi(x) if the disk controller is a SCSI device with its BIOS enabled or is a non-SCSI device. Use scsi(x) only if the disk controller is a SCSI device with BIOS disabled. The value for x begins at 0. Identifies the disk location. If the first component of the ARC name is scsi, disk(x) indicates which SCSI disk the operating system is located on. The x value begins with 0. If the first component of the ARC name is multi, this component is always disk(0), and the disk containing the operating system is indicated by the rdisk(x) component. The value for x begins at 0. Identifies the disk location. If the first component of the ARC name is multi, rdisk(x) indicates which physical disk the operating system is located on. The x value begins at 0. If the first component of the ARC name is scsi, the rdisk component is always rdisk(0) and the disk containing the operating system is indicated by the disk(x) component. The value for x begins at 0. Identifies which partition holds the boot files. The value for y begins at 1. RDISK(x) PARTITION(y) Piratez Book Page27
Slide 28: Administering Windows XP Professional 6.Managing Files File Compression Facts Keep the following information in mind when working with folder and file compression. When you compress a file, Windows makes a copy of the file, compresses it, then replaces the original file with the compressed one. When you open a compressed file, Windows decompresses the file. The decompressed file is used by the application. You cannot save or copy a compressed folder or file to a disk containing less free space than the folder or file would be uncompressed. Compression and encryption cannot be used on folders or files at the same time. Apply data compression to files that change size dramatically. For example, bitmap and spreadsheet files compress by a much larger percentage than application or word-processing files. Do not compress files that are already compressed using another compression utility. Use zipped folders to share compressed files with other computers. NTFS compression on volumes with cluster sizes larger than 4 KB is not supported. Copying and moving files and folders can affect their compressed state. To determine the final state of a file or folder, remember the following rules. If you copy or move a compressed file or folder to a non-NTFS partition, the file or folder is uncompressed (other file systems do not support NTFS compression). If you copy a compressed file or folder, it inherits the compressed state of the destination folder. If you move a compressed file or folder to the same NTFS partition, it retains its compressed state. If you move a compressed file or folder to another NTFS partition, it inherits the compressed state of the destination folder. If you copy or move a zipped folder, it always remains zipped (regardless of the destination file system). Compact.exe is a command prompt tool that you can use to set and manage compression. The following table summarizes some options for the Compact.exe command. Option /C /S /U Action Compresses the specified files. Folders are marked with the compressed attribute. Compresses all subfolders of the specified folder. Uncompresses the specified files. Folders are marked with the uncompressed attribute. For example, the following command will compress all files in the C:\Documents\Transfer folder, including all subfolders: Compact /C C:\Documents\Transfer\*.* /S Encryption Facts Keep the following information in mind as you work with EFS. You must have Write permission to a folder or file to encrypt it. Piratez Book Page28
Slide 29: Administering Windows XP Professional Windows transparently unencrypts and encrypts folders and files as users use them. You cannot encrypt System or Read-only files. Encryption and compression cannot be used on folders or files at the same time. If you are having trouble opening encrypted folders or files, make sure you are logged in to the user account that encrypted the folder or file and that you still have permissions for the file. In a workgroup, the local Administrator user account is the default recovery agent. In a domain, the domain Administrator account is the default recovery agent. To recover encrypted files, the files and recovery key need to be on the same computer. Without the private key or recovery key, you cannot copy or move an encrypted file. You can however, back up the files and restore them to the computer where a recovery key is located. You can also export the recovery key and import it onto the computer storing the files you want to recover. You can add additional authorized users to files (not folders) who will be able to open encrypted files. Implement encryption through the file or folder properties. Or, use the Cipher command to encrypt files and folders. Copying and moving files might change the encrypted state of the file. To determine the final state of a file, remember the following rules. If you copy or move an encrypted file or folder to a non-NTFS partition, the file or folder is unencrypted (other file systems do not support encryption). If you copy or move an encrypted file to an NTFS partition (either to the same one or to a different one), the file remains encrypted. If you copy an unencrypted file to an encrypted folder, the file is encrypted. If you move an unencrypted file into an encrypted folder, the file remains unencrypted. Encryption is preserved when the file is backed up. Normally, encrypted files are meant to be stored and read on the local computer only. When saving encrypted files on a remote computer, be aware of the following: You can only encrypt files stored on remote computers if the computer is trusted for delegation in Active Directory (how to do this is beyond the scope of the course). When moving files encrypted on your local system to another computer (for use on that computer), make sure your certificate and private key are available on the other computer. Otherwise, you might be unable to open the file. When moving encrypted files to another computer over the network, files are not encrypted while they are in transit. Files might be intercepted as they are transferred. Use IPSec to secure network communications. Disk Quota Facts Keep the following in mind as you work with disk quotas. Quotas can only be set on NTFS volumes. The Quota tab will not be shown for FAT volumes. Every file and folder that users create, copy, save, or take ownership of on a volume or partition counts toward their disk quota. The space available for applications to save files to is equal to the amount of space left in a user's quota. Each NTFS volume or partition on a hard disk has its own set of disk quotas, even if they are on the same hard disk. System and application files count toward disk quotas, so the user account which installs software needs a higher limit. Piratez Book Page29
Slide 30: Administering Windows XP Professional You cannot set a quota limit on the built-in Administrator account. You cannot delete a user's account quota until you remove or take ownership of all of that user's files on the volume. You can use the Fsutil.exe command to manage quotas from the command prompt. Quota configurations: Configuration Disabled Tracked Enforced State File usage data is not collected and storage space is not limited. File usage data is collected, but storage space is not limited. Users can exceed their quota limit. Warning levels and restrictions are enforced to prevent users from exceeding disk space limitations. If a user exceeds the quota limit, take one of the following actions: Delete files owned by the user. Change ownership of files (quota limits are enforced based on owned files). Move files to other volumes (quota limits are enforced on a volume or partition basis). Increase the quota limit. You cannot reduce the amount of space used by files by compressing them. Quotas count the uncompressed size of a file toward the quota limit. NTFS Permission Facts The following table summarizes the permissions for folders and files. Permission Read Write List Folder Contents Read & Execute Modify Full Control Allowed Actions View folder details and attributes. View file attributes; open a file. Change folder or file data and attributes. Includes all Read actions and adds the ability to view a folder's contents. Includes all Read actions and adds the ability to run programs. Includes all Read & Execute and Write actions and adds the ability to add or delete files. Includes all other actions and adds the ability to take ownership of and change permissions on the folder. Use these suggestions to help you plan NTFS permissions. Identify the users and their access needs (i.e., the actions they need to be able to perform). Based on the types of users you identify, create groups for multiple users with similar needs, and then make users members of groups. Assign each group (not user) the permissions appropriate to the group's data access needs. (Grant only the permissions that are necessary.) As you assign permissions, take inheritance into account. Set permissions as high as possible on the parent container and allow each child container to inherit the permissions. When necessary, you can override inheritance on a case by case basis. Deny always overrides Allow, so be careful when you use it. Shared Folder Facts Piratez Book Page30
Slide 31: Administering Windows XP Professional To access a shared folder: In Network Neighborhood, browse to the computer Use the UNC path to connect to the share: \\computername\sharename The following table lists the share permissions and the level of access the permission allows. Permission Read Change Full Control Actions Browse the shared folder and its files Open files in the shared folder and its subfolders Copy files from the shared folder Run programs All Read actions (browse, open files, copy files from the folder, run programs) Write to files and change file attributes Create new files and subfolders Copy files to the shared folder Delete files or subfolders All Read and Change actions Configure share permissions Use both share and NTFS permissions to secure network resources. Here is a common strategy for administering resources with share and NTFS permissions: 1. Secure the folder with NTFS permissions. 2. Share the folder using the default share permission of Full Control for Everyone. An administrative share is a special share hidden from browsing. Keep in mind the following facts about Administrative shares. Administrative shares are hidden by following the sharename with a $. Default Administrative shares are accessible to only members of the Administrators group. Any share can be hidden by appending the $ to the sharename. A hidden share can only be accessed through the UNC path (they do not appear when you browse). Offline File Facts Offline file caching Setting Manual Caching for Documents Automatic Caching Documents Automatic Caching Programs options: Description When you share a folder, this is the default configuration. This option allows the caching of documents that a user manually selects. To make the share available offline, choose the shared folder or file then select Make available offline from the File menu in Explorer. This option allows the caching of files that a user opens on the local machine. This option allows the caching of programs run from the network; however, only those components of the program that the user executes will be available offline. for for Internet Information Services (IIS) Use IIS to enable: Active Desktop Internet Printing Remote Desktop Share folders (Web folders) for access through IE Piratez Book Page31
Slide 32: Administering Windows XP Professional You should know the following facts about IIS: When you install IIS, a default Web site is automatically created. By default, all Web content is stored in the %systempartition%\inetpub\wwwroot directory. A virtual directory is used to make content outside of the default directory path available through the Web site. To make content available on your Web site: Place content in the \inetpub\wwwroot directory. Web share a folder. This creates a virtual directory in the Web site. Piratez Book Page32
Slide 33: Administering Windows XP Professional 7.Printing Printing Facts The following table lists some key definitions with which you should be familiar. Term Print Server Printer Print Device Print Driver Print Queue Printer Port Definition The computer where printing is established. A virtual device inside the print server that can be configured to send output to a printing device. The physical device connected to the print server where print output occurs. The software that allows the printer to communicate with the print device. The portion of the hard drive where print drives are stored before going to the print device. The means by which a print device connects to a print server (parallel port, serial port, or to the printer's NIC). When you configure printing, you create a logical printer object that references a print device or points to another logical printer on the network. The following table lists the configuration choices to make to configure each type of printer. Print Device Location Connected to the LPT, USB, or COM port of the local computer Connected directly to the network through a NIC connected to the printer Connected to the LPT, USB, or COM port of a remote computer (with a shared printer) UNIX Printing Facts The following table lists some key terms for working with UNIX printing. Term LPD LPR LPQ Definition Line Print Daemon Service that hosts printer. The Print Server runs the LPD service. Line Print Request client requests print services. The Print Client runs LPR and LPQ. Represents the printer queue. The LPQ works with the LPR to request services. The Print Client runs LPQ and LPR. Printer Type Local Local Network Port Type LPT, USB, or COM TCP/IP (identify the IP address of the print device NIC) UNC path (\\computername\sharename) Windows XP can function as either the server or the client in a UNIX printing environment. To configure Windows XP as the server: 1. Install UNIX Print services with LPD. 2. Configure a local printer. 3. Share the printer. To configure Windows XP as the client: 1. Install UNIX Print services 2. Configure a network printer. Select LPR as the port type. Piratez Book Page33
Slide 34: Administering Windows XP Professional Managing Printing The following table summarizes the permissions that can be assigned to printers. Printer permissions apply to both local and shared printers. Permission Print Manage Documents Manage Printer Allowed Actions Send print jobs and manage your own documents Manage all documents in the queue Change configuration settings and permissions The following table summarizes the printing component you would use to complete each configuration task. To Configure . . . Additional drivers for a printer Job priority Notification Permissions Ports Sharing Spool file location Advanced Print Configuration Printer Pooling Printer pooling uses a single printer object to represent multiple print devices. With printer pooling, Users send print jobs to a single printer The print server decides which print device to send the job to When creating a printer pool, all print devices in the pool: Must be the same model (using the same printer driver) Should be in the same physical location (because users won't know which physical device their print job prints on) Printer pools: Speed printing by reducing the time that documents spend waiting for a free print device Simplify printer administration because you manage multiple devices through a single printer object Multiple Printers Configure multiple printer objects for a single print device to control access to the printer based on job roles. To configure multiple printers: 1. Create multiple printer objects, one per group or user with distinct access. 2. For each printer, configure permissions to restrict access. 3. Fine-tune access by editing the Advanced properties for the printer to modify priority (99 is the highest) and restricting printer availability. Edit . . . Printer object properties Print server properties Print Queue, job properties Print server properties Printer object properties Printer object properties Print server properties Printer object properties Print server properties Piratez Book Page34
Slide 35: Administering Windows XP Professional Faxing Facts To configure the fax service, complete the following steps: 1. Install the fax hardware. This might be a fax modem or a dedicated fax device. Use Device Manager to verify that the device is recognized by the system and configured. 2. Use Add or Remove Programs to install the fax services Windows component. 3. Open the Fax Console and follow the wizard to set initial fax properties. When you open the Fax Console for the first time, the Fax Configuration wizard will run. During the wizard, supply the following information. Information Sender information Fax device Enable send and/or receive Transmitting Subscriber Identification (TSID) Called Subscriber Identification (CSID) Routing options Description This information identifies you or your company. Information you enter is used on the default fax cover pages. If more than one device is installed, select the device that will be used to send or receive faxes. Specify whether the device will automatically send and/or receive faxes. If receive is enabled, configure the number of rings before the device answers a call. This identifies your device to other devices when you send a fax. The TSID is usually a combination of the phone number and business name. You can only configure this option if the device is enabled to send faxes. This identifies your device to other devices when it answers (CSID) a fax. The CSID is usually a combination of the phone number and business name. You can only configure this option if the device is enabled to receive faxes. Identify what to do with faxes when they are received. By default, they are stored in the Inbox in the Fax Console. In addition, you can print them automatically or save them in a folder. You can only configure this option if the device is enabled to receive faxes. Sending a fax is only slightly more complicated than printing a document. To send a fax: 1. Create the document. 2. From within the document, print the device. Select the fax device as the printer to use. 3. Use the Send Fax wizard to specify parameters (such as the phone number to dial) and send the fax. 8.Internet Explorer URLs Using a customized URL in the Active Directory Web browser allows you to access various types of resources. The following table shows the syntax for common URLs. To access... A custom port on a Web server A secure Web site using SSL Internet printing Files on an intranet An FTP site An FTP site that requires a username Use... http://sitename:port https://sitename http://servername/printers http://servername/sharename/filename ftp://sitename ftp://username:password@sitename Example http://www.mysite.com:8080 https://www.mysite.com Piratez Book Page35 http://mysite.local/printers http://mysite.local/docs/report.htm ftp://ftp.mysite.com ftp://maryg:4rt5l@ftp.mysite.local
Slide 36: Administering Windows XP Professional and password 9.System Optimization Applications and Processes Applications Facts You should know the following information about applications: All 16-bit applications run in the same NTVDM process by default. One malfunctioning 16-bit application can cause all other 16-bit apps running in the same memory space to hang. Stop the NTVDM process to stop the virtual DOS machine and all programs running in it. Each 16-bit application can be configured to run in a separate memory space in its own NTVDM. Windows XP allows local programs running in XP to be configured to run in compatibility mode. Compatibility mode applies a predefined set of modifications that changes the operating system’s behavior to more closely emulate a previous version of Windows. Applications that consume excessive resources can be assigned a lower priority level. This is a list of the program priority levels (from highest to lowest): Realtime High AboveNormal Normal BelowNormal Low Processes and Services Facts You should know the following information about managing processes: End processes using Task Manager or the Tskill command. View processes running on a system with Task Manager or the Tasklist command. You should know the following information about scheduled tasks: Task Scheduler is a service that can be stopped and started in the Services applet. Scheduled tasks can run daily, weekly, monthly, or any other specified time. Use the Scheduled Task wizard to schedule new tasks. Scheduled tasks run under the security context of a particular user. Open the properties for the task and enter the account information in the Run as box. The Pause Task Scheduler command prevents scheduled tasks from running. The Continue Task Scheduler command allows paused tasks to begin running. Disable tasks individually by editing their properties to prevent a task from running at an undesired time. Installer Package Facts Piratez Book Page36
Slide 37: Administering Windows XP Professional The following table describes the file extensions that are used with installer packages. File Extension .msi .msp .mst Description A Windows Installer package file. Use the Msiexec command to deploy .msi files. Use the /i switch to specify the package file. A patch file. An .msp file can be applied to an .msi, but the .msi must be redeployed after the patch is applied. A transform file. Transform files are applied when a software package is assigned or published. Transform files change .msi files. To apply a .mst to a .msi during deployment, append TRANSFORMS= followed by a list of .mst files to the Msiexec command. A file to reference a Setup.exe file on a network, for example. Using Group Policy, you can either assign or publish software. You can also associate software packages with either users or computers.A .zap file can be used to provide .zap installation instructions to the OS for older, legacy applications that do not directly support scripted installations. Since the application that you are planning to deploy supports scripted installations Applications may be published to users, but not to computers. You can assign applications to either users or computers. When you publish an application, it does not appear in the user's Start menu. Instead, the user goes to Add/Remove Programs to install the program. Assigning software to a computer installs the software when the computer starts up. Users cannot use Add/Remove Programs to remove computer assigned software. Assigning software to a user puts a shortcut on the user’s Start menu. The software is automatically installed when the shortcut is clicked. System Performance System Monitor To optimize the system, you need to identify system bottlenecks. A bottleneck is any component or device that slows down your system. You can examine how each component of the system is behaving. Each component is broken down into objects, and each object has multiple counters that measure the object's performance. The following table outlines the major objects and critical counter values: Object Processor Memory Pagefile Logicaldisk Physicaldisk Network Purpose Measures the CPU performance Measures RAM performance Measures the performance of the portion of the hard disk dedicated to functioning as memory Measures the performance of the volumes and partitions on the hard disk Measures how the individual, physical disks are performing (the read/writes and percentage to be written to the disk) Measures the performance of the system on the network Counters % Processor time Interrupts/sec Pages/sec Available space % Usage % Disk time Disk queue % Disk time Disk queue Bytes total/sec Optimum < 80% sustained < 3500/sec < 20 pages/sec > 4 MB available < 90% used < < < < 90% 2 90% 2 You can also view the Performance tab in Task Manager to monitor system performance. Piratez Book Page37 < Network capacity
Slide 38: Administering Windows XP Professional Mobile Performance Facts You should know the following information about mobile computer power states: Power State Hibernation Advantages Data in memory is saved to the hard disk. Restores desktop exactly as it was. Restores the computer more quickly than from hibernation. Disadvantages The computer takes a longer time to come out of hibernation than standby. Requires as much free space on the system drive as there is RAM in the computer. Does not preserve the system state. Standby Backup Facts Most backup methods use the archive bit on a file to identify files that need to be backed up. When a file is modified, the system automatically flags the file as needing to be archived. When the file is backed up, the backup method may reset (clear) the archive bit to indicate it has been backed up. The following table shows the type of data backed up using each backup method. Backup Type Full Incremental Differential Copy Backs Backs Backs Backs Backs Up up all files regardless of the archive bit. up files on which the archive bit is set. up files on which the archived bit is set. up all files regardless of the archive bit status. Resets Archive Bit? Yes Yes No No Most of the time, you will perform backups using a strategy that combines backup types. The following table compares common backup strategies. Strategy Full Backup Full + Incremental Full + Differential Backup Characteristics Requires large tapes for each backup. Takes a long time to perform each backup. Incremental backups are quick to perform. This is the fastest backup method. Differential backups take progressively longer to complete as time elapses since the last full backup. Restore Characteristics To restore, restore only the last backup. To restore, restore the full backup and every subsequent incremental backup. To restore, restore the last full backup and the last differential backup. Next to a full backup, this is the fastest restore method. Note: Do not combine incremental and differential Keep in mind the following facts about doing backups: Back up user data more often than system state data (it changes more frequently). Back up system state data whenever you make a system change. Files backed up from one system might not restore to another system. Restore to a system running the same OS. Be sure to test your back up and restore strategy. It does no good to back up your data if you can't restore it. Backup Devices Facts Piratez Book Page38
Slide 39: Administering Windows XP Professional Terms and definitions: Removable storage: Storage media (tape) that can be removed from the device. Media pool: The space on the removable storage where the backup is performed, and where the backed up files will be physically located. To configure a backup device, begin by installing the device and making sure it is recognized and configured in Device Manager. To install devices, you must be a member of the Power Users or Administrators group. For parallel backup devices with bi-directional control, enable enhanced parallel port (EPP) in the BIOS. After configuring the device, enable the media (the tape) in Computer Management to see the tape itself. There are two modes for viewing media: Full mode allows you to see the media pool as well as all the nodes inside the media pool. This lets you select exactly what you want to restore or backup. Simple mode lets you see only the media pool. Make users members of the Backup Operators group to enable them to back up and restore files. Backup Operators cannot view, edit, or delete files. To allow Backup Operators to eject the backup media, assign the Eject media user right to the Backup Operators group. System Recovery Facts Windows XP offers you several different ways to recover from a system failure. Here are some methods you can use to recover from system problems. Tool Driver Rollback Last Known Good Configuration Safe Mode Use Use this tool to uninstall recent driver changes and revert to a previous version. In Device Manager, edit the properties of the device. This option reboots the system using the last successful hardware profile. However, it can only be used if you have not logged on after the last change. Boots Windows with a limited number of drivers and features enabled. Press F8 during boot to enter Safe Mode. After booting into Safe Mode, you can use Device Manager to rollback drivers, disable devices, uninstall devices, or reinstall or update drivers. This is a command-line interface. Before a problem exists, you must install Recovery Console. Install it by using the winnt32.exe /cmdcons command to install the recovery tools on the system. Use Recovery Console to fix boot sector or master boot record (MBR). You can also remove or update system files and repartition hard disks. This restores Windows files. Install Windows to a new location on the hard disk. The new installation allows you to preserve data files. Recovery Console System Restore Parallel Install Use the ASR diskette with a valid backup to restore the system. Piratez Book Page39 Keep in mind the following facts about using Automated System Restore (ASR).
Slide 40: Administering Windows XP Professional The ASR diskette is a boot diskette that contains limited system configuration information. The rest of the information is on the backup tape. Use the backup program to create the ASR diskette. The ASR diskette contains the Asr.sif and Asrpnp.sif files. Copies of these files are placed on the system so you can copy them manually. Piratez Book Page40
Slide 41: Administering Windows XP Professional 10.System Security Account Policies Facts Account policies control passwords and login properties. Settings in the local GPO are used if the computer is a member of a workgroup. Settings in the domain GPO are used for computers that are members of a domain. Policy settings are applied to the computer, not the user. The following table describes the password settings. Setting Password history Maximum password age Minimum password age Minimum password length Password complexity Description This setting requires users to input unique passwords. The system can store up to 24 passwords, so the user can't repeat previous passwords. This setting requires the user to change the password after a given length of time. This setting keeps users from changing passwords immediately after they've reset their passwords. This prevents users from defying the password history by entering several passwords to get back to a preferred password. This prevents people from using passwords that are too short. This setting requires users to create a password with a minimum of three of the four types of special characters (e.g., lower case letters, upper case letters, numbers, or !, @, #, $, %, ^, &, *). This setting also disallows use of dictionary words or any part of the user login identification. This setting requires the system to store the password with reversible encryption. Reversible encryption Use account lockout to protect user accounts from guessing and prevent accounts from being used when hacking attempts are detected. The following table describes account lockout settings. Setting Lockout duration Lockout threshold Reset account lockout Auditing Facts You can configure the following audit policies in Group Policy. Audit Category Account logon Account management Logon Object access Policy change Privilege use Trigger Event(s) Audits logon through a user account Recorded by the local computer for the local account, recorded by domain controller for the AD account Add, rename, disable/enable, delete, or change the password for a user account Log on or off of the local system Make a network connection to a local computer File, folder, printer access Change account password or logon settings, user rights, or audit policies User exercises user rights Description This setting determines the length of time the account will be disabled. When set to 0, an administrator must unlock the account. This setting determines the number of attempts a user can make before the account is locked. This setting determines the amount of time that must pass before the account is enabled. Piratez Book Page41
Slide 42: Administering Windows XP Professional Process tracking System events An administrator takes ownership of an object An application performs an action This is used mainly for program debugging and tracking Shutdown, restart, service starts An event affects security or the security log Keep in mind the following about configuring auditing: Auditing can be enabled to log successful or failed events (or both). Because auditing consumes system resources and might result in a lot of generated data, enable auditing only on the events you are interested in. View audit entries in the Event Viewer Security log. Set the CrashOnAuditFail registry entry to prevent users from logging on to the system when entries can't be written to the security log. To monitor a domain for unauthorized user access, configure the domain with a group policy to Audit Logon Events. For file auditing to occur, the files must be on NTFS partitions. With auditing configured, clearing the log generates an event identifying when the log was clear and by whose authority. Security Templates Facts Windows XP ships with the following predefined security templates: Template Securews Hisecurews Compatws Function Secures a workstation without causing application or compatibility issues Secures a workstation as much as possible Forces compatibility across Windows platforms Use the Security Analysis and Configuration snap-in to manage security templates, analyze current settings, create custom templates, or import an existing template. When working with templates: Compare an existing system with a template to see how the system compares to the template. Clear current settings before importing a new template. After applying a secure template, you might need to restore group memberships in the Administrators or Power Users group. You can also use the Secedit command to analyze and apply templates. IE Security Facts Microsoft uses security zones to define security levels for specific Web sites. Each zone can have custom settings. The following table lists the IE security zones. Security Zone Local intranet Description Includes everything on the local area network. By default, this includes every site with a UNC path, including sites available through a proxy. You can customize the parameters that are used to automatically add sites to the zone. In addition, you can add sites to this zone or require server verification (https) for all sites in the zone. By default, the zone applies medium-low security. The trusted zone has the lowest security settings of any zone. No sites are automatically added to the zone--you need to explicitly add sites to the zone. You can require https for trusted zones. The restricted zone has the highest security settings. You must explicitly add sites to the Restricted Piratez Book Page42 Trusted
Slide 43: Administering Windows XP Professional Internet zone. The Internet zone includes all sites that are not in other zones. You cannot add or remove sites from this zone. Cookies are small files saved on your computer that store information about sites you've visited. Cookies can violate privacy by recording (and reporting) your Web-browsing activities. The following table describes the cookie-handling settings in IE. Privacy Setting Accept no cookies First party Third party IE Certificates A certificate authority (CA) is an organization that is trusted to issue certificates. The root CA issues certificates to entities and other CAs. Subordinate CAs get their authority from the root CA and can issue certificates that will be trusted because of their authorization from the root CA. A standalone CA is a CA that gets its authority from itself. Standalone CAs are often used inside an organization. Certificates are used on the Internet to secure communications between hosts. Internet Explorer keeps track of: Trusted Certificate Authorities Certificates for individual sites Internet Explorer automatically includes certificates from common CAs and other entities. When using a certificate from a standalone CA, import the CA's certificate into the Trusted Root CA list in Internet Explorer. Description May prevent access to some Web sites. These come from the current sites you're visiting. These come from secondary sites (banner ads). Piratez Book Page43