Slide 1: HP0-S17
Integrating and Managing HP BladeSystem in the Enterprise Exam: HP0-S17
Demo Edition
CERT MAGIC
1 http://www.certmagic.com
Slide 2: HP0-S17
QUESTION: 1 You are designing a customer system that must comply with financial department regulations that require a tape backup of data be performed every 24 hours. The server blade specified in the design is a BL685c. You will use an Ultrium 448c Tape Storage Blade to satisfy the requirement of the tape backup solution. What are the requirements for this solution to be valid in a c7000 BladeSystem enclosure? (Select two.)
A. HP Data Protector 6.0 must be installed on the partner server blade. B. The Microsoft iSCSI initiator must be installed on the partner server blade. C. The Ultrium 448c Tape Blade must be installed in the top bay adjacent to the server. D. The Ultrium 448c Tape Blade must be installed in the lower bay adjacent to the server. E. An HP PCI Express Mezzanine Pass-Thru Card must be installed in the mezzanine 3 slot.
Answer: D, E
QUESTION: 2 Which methods does HP Dynamic Smart Cooling use to reduce data center power and cooling requirements? (Select three.)
A. sensors to govern air flow B. sensors to govern temperature C. dynamically adjusts air flow and temperature to meet cooling requirements D. hybrid model that combines local and centralized cooling in a single system E. policy-based power management to control processor core frequency and voltage based on application demand F. adaptive management of cooling sensors within the BladeSystem c7000 Enclosure to meet cooling requirements
Answer: A, B, C
QUESTION: 3 A customer wants to deploy a c7000 Enclosure and six server blades in a datacenter with limited power. How can they ensure the solution fits within the available datacenter power envelope?
A. The customer needs to make sure they have at least 6750 watts of available power in every case. B. Use the HP BladeSystem Sizer to determine how much power is needed for the configuration
2
http://www.certmagic.com
Slide 3: HP0-S17
they want to deploy. C. Use the HP Rack and Power tool to determine how much power is needed for the configuration they want to deploy. D. Use the Enterprise Configurator in ActiveAnswers to determine how much power is needed for the configuration they want to deploy.
Answer: B
QUESTION: 4 Which features does Virtual Connect Ethernet module (VC-Enet) provide in a network environment? (Select two.)
A. VC-Enet can stack across four enclosures in a rack. B. VC-Enet appears as an HP ProCurve device to other network devices. C. VC-Enet will not add any new switches for the network administrator to manage. D. VC-Enet domains can be created directly using the Onboard Administrator console.
Answer: A, C
QUESTION: 5 You are designing a customer deployment of an HP c7000 Enclosure. Your customer would like as much internal storage as is possible. Using half-height server blades and SB40c Storage Blades, what is the maximum number of SB40c Storage Blades that you can install in the enclosure?
A. 4 B. 6 C. 8 D. 15
Answer: C
QUESTION: 6 A customer is considering using the HP Virtual Connect Fibre Channel (VC-FC) module instead of a B-series Fabric SAN Switch for an HP c-Class BladeSystem. The BladeSystem enclosure will connect to an existing MSA1000 storage array with a dual MSA 2/8 SAN Switch. Which statement is true about this solution?
3
http://www.certmagic.com
Slide 4: HP0-S17
A. The solution can be deployed because both the VC-FC module and the MSA 2/8 SAN Switch are HP products. B. The solution cannot be deployed because the VC-FC module must be connected through an FC fabric switch that supports N-Port ID Virtualization (NPIV). C. The solution can be deployed because the VC-FC module uses standard FC technology and is compatible with the MSA 2/8 SAN Switch with a direct connection. D. The solution cannot be deployed because the VC-FC module can only operate at 4Gb/s and the MSA 2/8 SAN Switch can only operate at 2Gb/s; therefore the two are not compatible.
Answer: B
QUESTION: 7 Click the Task button. Match the HP c7000 Enclosure interconnects with the correct description.
Answer:
4
http://www.certmagic.com
Slide 5: HP0-S17
QUESTION: 8 Your customer is looking for an Ethernet interconnect with Fibre uplinks for their c7000 Enclosure. Which interconnects should be considered? (Select two.)
A. GbE2c Switch B. Infiniband switch C. Cisco Catalyst 3020 D. GbE2c Layer 2/3 Switch E. Ethernet Pass-Thru Module
Answer: C, D
QUESTION: 9 Which devices can be assigned an IP address through Enclosure Bay IP Addressing (EBIPA) for c-Class server blades? (Select two.)
A. iLO 2 cards B. interconnects C. Insight Display D. LAN interfaces of mezzanine cards E. iSCSI target IP address on server blades
Answer: A, B
QUESTION: 10
5
http://www.certmagic.com
Slide 6: HP0-S17
Which management suite delivers core management functionality for the HP BladeSystem solution, including server deployment, health monitoring, performance monitoring, vulnerability scanning and patch management?
A. HP Storage Essentials B. HP Operations Software C. Insight Control Environment D. HP Systems Insight Manager
Answer: C
6
http://www.certmagic.com
