From:
gtglobe
Views: 1816
Comments: 0
The installation of PEX is so easy that many people use it for plumbing purposes without any external help. PEX is widely used in many countries for building water supply systems.
From:
gtglobe
Views: 864
Comments: 0
A Manufacturer of High Quality PEX and Radiant PEX Tubing and Fittings.To learn more visit http://www.gtglobeindustries.com/
Slide 1: www.gtglobeindustries.com GTPEX® 4-STEP INSTALLATION GUIDE
Slide 2: 1. CUT Cut the GTPEX® pipe at a 90º angle using the appropriate PEX cutter, such as our GTCut tool.
Slide 3: 2. INSERT Insert the ring onto the pipe at about 1/8” from the end. Insert the fitting into the GTPEX® pipe until the pipe end tightly reaches the shoulder of the fitting.
Slide 4: 3. CRIMP Make sure the ring is still 1/8” from the end of the PEX pipe.Use the appropriate tool (such as GTCrimp) to crimp the ring over the pipe until the tool is completely closed.
Slide 5: 4. TEST Test the crimp ring with the “Go-No-Go” tool to make sure the crimp pressure is satisfactory. To do this, use the appropriate tool size and slide it directly onto the crimp ring according to the crimp tool instructions. Do not slide the “Go-No-Go” tool on the PEX up to the ring. If the crimp ring fits inside the end of the “GO” side, then your crimp passes the test and you may move to the next fitting. If the crimp fits inside the end of the “NO GO” side of the tool,
Slide 6: The 4-step installation is now complete. If you need more information on the installation of GTPEX®, please contact us at 1-877GTGLOBE. Visit us at www.gtglobeindustries.com
